Jiangyin Xinyu Decoration Material Co.,Ltd
Jiangyin xinyu Group ALUMINUM EXTRUSION PROFILE,CNC MACHINING
Add to Cart
Anodized after Machining Aluminum Cutting and CNC Drilling Frame
Alkali sand sandblasting oxidation and oxidative
Alkali sand oxidation : chemical etching method ( darker alkaline etching ) and then make a sand surface anodic oxidation effect , also known as matt anodized , alkaline etching the substrate after anodization , not shiny, general profiles processing this process , corrosion, insulation. Oxide sandblasting : sandblasting before making anodizing . Sandblasting is a physical effect, so that the aluminum surface is more delicate , can squeeze marks fade .
At present my company to use more common oxidation aluminum frame and base sand oxidation are two more expensive than ordinary alkaline oxidation oxidized sand expensive , customers can choose according to need .
Anodizing type
Oxidation of chemical oxidation is generally ( not charged ) and anodizing ( energized ) , and usually anodized oxide . Anodizing : with aluminum as the anode , oxidation to form the surface layer of 5-20um Average oxide film , has good corrosion resistance and good wear resistance . Into the form by anodization current : DC anodizing, anodized AC , pulsed anodic oxidation. Divided by the electrolyte : sulfuric acid, oxalic acid, chromic acid, mixed acid and sulfo- acid -based solution to the natural colored anodic oxidation. Press temper of the film : ordinary film , the hard film ( thick film ) , ceramic film, a bright decorative layer , a semiconductor barrier layer effect anodization .
More information or products please contact us or enter our Website: http://http://http://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.comhttp://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.com
| Alloy | Chemical Composition | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al(Min) | ||
| 6061 | Al Mg 1 SiCu | 0.4- | 0.7 | 0.15- | 0.15 | 0.8- | 0.04- | 0.25 | 0.15 | 0.15 | Remainder |
| 6063 | Al Mg Si | 0.2- | 0.35 | 0.1 | 0.1 | 0.45- | 0.1 | 0.1 | 0.1 | 0.15 | Remainder |
| Alloy: | 6063 | 6061 | 6060 | 6005 | 6082 | 6463 | 7075 |
| Temper : | T5 | T6 | T4 |
|
|
|
|
| Standard: | DIN | AAMA | AS | CHINAGB |
|
|
|
| Certification: | ISO 9001:2008;ISO 14001:2004;OHSAS 18001:2007 | ||||||
| Surface Finish: | Mill finish | Anodizing | Powder Coating | Wood Grain | Electrophoresis | Polished | Brushed |
| Color: | Anodizing: | Silver, bronze, champagne, titanium, nickel, golden yellow, etc. | |||||
| Anodizing thickness is up to 25um. | |||||||
| Powder Coating: | White, black, bronze, grey, green, etc . | ||||||
| Powder coating thickness is more than 60um. | |||||||
| Wood Grain: | 1. Italian MENPHIS transfer printing paper. | ||||||
| 2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. | |||||||
| 3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc. | |||||||
| Electrophoresis: | Silver, nickel, golden yellow, black, champagne, etc | ||||||
| Polishing | Silver, nickel, golden yellow, black, etc | ||||||
| Brushing: | Silver, nickel, golden yellow, black, bronze, etc | ||||||
| Machining: | Cutting, punching, drilling, bending, weld, mill, CNC, etc. | ||||||
| OEM customized aluminium extrusion profiles are available. | |||||||
More information or products please contact us or enter our Website: http://http://http://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.comhttp://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.com