Jiangyin Xinyu Decoration Material Co.,Ltd
Jiangyin xinyu Group ALUMINUM EXTRUSION PROFILE,CNC MACHINING
Add to Cart
6063 T5 Oxidation of Alkali Sand Aluminum Drilling and deburr/break sharp corners
Alkali sand sandblasting oxidation and oxidative
Alkali sand oxidation : chemical etching method ( darker alkaline etching ) and then make a sand surface anodic oxidation effect , also known as matt anodized , alkaline etching the substrate after anodization , not shiny, general profiles processing this process , corrosion, insulation. Oxide sandblasting : sandblasting before making anodizing . Sandblasting is a physical effect, so that the aluminum surface is more delicate , can squeeze marks fade .
At present my company to use more common oxidation aluminum frame and base sand oxidation are two more expensive than ordinary alkaline oxidation oxidized sand expensive , customers can choose according to need .
Anodizing type
Oxidation of chemical oxidation is generally ( not charged ) and anodizing ( energized ) , and usually anodized oxide . Anodizing : with aluminum as the anode , oxidation to form the surface layer of 5-20um Average oxide film , has good corrosion resistance and good wear resistance . Into the form by anodization current : DC anodizing, anodized AC , pulsed anodic oxidation. Divided by the electrolyte : sulfuric acid, oxalic acid, chromic acid, mixed acid and sulfo- acid -based solution to the natural colored anodic oxidation. Press temper of the film : ordinary film , the hard film ( thick film ) , ceramic film, a bright decorative layer , a semiconductor barrier layer effect anodization .
More information or products please contact us or enter our Website: http://http://http://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.comhttp://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.com
| Alloy | Chemical Composition | ||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al(Min) | ||
| 6061 | Al Mg 1 SiCu | 0.4- | 0.7 | 0.15- | 0.15 | 0.8- | 0.04- | 0.25 | 0.15 | 0.15 | Remainder |
| 6063 | Al Mg Si | 0.2- | 0.35 | 0.1 | 0.1 | 0.45- | 0.1 | 0.1 | 0.1 | 0.15 | Remainder |
| Alloy: | 6063 | 6061 | 6060 | 6005 | 6082 | 6463 | 7075 |
| Temper : | T5 | T6 | T4 |
|
|
|
|
| Standard: | DIN | AAMA | AS | CHINAGB |
|
|
|
| Certification: | ISO 9001:2008;ISO 14001:2004;OHSAS 18001:2007 | ||||||
| Surface Finish: | Mill finish | Anodizing | Powder Coating | Wood Grain | Electrophoresis | Polished | Brushed |
| Color: | Anodizing: | Silver, bronze, champagne, titanium, nickel, golden yellow, etc. | |||||
| Anodizing thickness is up to 25um. | |||||||
| Powder Coating: | White, black, bronze, grey, green, etc . | ||||||
| Powder coating thickness is more than 60um. | |||||||
| Wood Grain: | 1. Italian MENPHIS transfer printing paper. | ||||||
| 2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. | |||||||
| 3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc. | |||||||
| Electrophoresis: | Silver, nickel, golden yellow, black, champagne, etc | ||||||
| Polishing | Silver, nickel, golden yellow, black, etc | ||||||
| Brushing: | Silver, nickel, golden yellow, black, bronze, etc | ||||||
| Machining: | Cutting, punching, drilling, bending, weld, mill, CNC, etc. | ||||||
| OEM customized aluminium extrusion profiles are available. | |||||||
More information or products please contact us or enter our Website: http://http://http://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.comhttp://www.xinyu-aluminum-com.ecer.comwww.xinyu-aluminum-com.ecer.com